[Loadstone] Exploration mode again

Kit goldeneagle74 at gmail.com
Mon Jul 16 01:53:12 BST 2012


Well, all I can say for new users, read the help manual and understand the 
difference of navigation and exploring mode. then you will never get lost or 
mixed. redefining the keys in my opinion won't help. There are so many other 
things to do in developing LS.
----- Original Message ----- 
From: "Ari Moisio" <arimo at iki.fi>
To: <loadstone at loadstone-gps.com>
Sent: Saturday, June 09, 2012 11:29 AM
Subject: Re: [Loadstone] Exploration mode again


Hi Shawn

My comments inline


  Shawn Kirkpatrick kirjoitti> I don't know what screen reader you're using 
but normally in exploration mode
> the cursor keys (the joystick) does nothing at all so should be silent if
> pressed. This is because a 4-way key doesn't map well to the 8-way 
> directions
> in exploration mode.

I use Mobilespeak that will announnce content of the screen after keypress
and small delay so pressing the cursor keys will repeat the old screen
content. There is same issue with the shift key but that is not any  big
problem when one gets used to it. This is not a bug of mspeak  but instead
a feature.

Of course if the arrow keys are user definable at the next version  thisl
will solve the issue.


> As for entering exploration mode, when it happens is pretty obvious: when 
> you
> hit the key to activate it (usually 0) or select it from the menu. The 
> other
> way it's entered is if you hit select on a point when in a search. This is 
> so
> you can pick a point and then explore around it. Either way when it goes 
> in
> to exploration mode it actually says "exploration mode" I'm not sure how 
> it
> could be much clearer.

If user for example presses the select button accidentally too long LS
will enter next time in a exploration mode. Also single announcement about
mode change could be easily missed on a noisy environment. Or user just to
forget to close the search result and press enter later to find the
nearest point. There  so many iissues user have to concentrate when
walking around.

I'm especially worried about newbies that wouldn't be aware of each
mode change and will probably even not use exploration mode  at first. It
really requires training to get used with it and when youre lost somewhere
thats not the best time to start learning it.

E-mode is nice to have in the coach when learning  some environment but i
have very rarely used it in the move. Searching  nearest or named points
had been been enough for me. In  fact only time i use the e-mode on the
move is when i use my route calculator that calculates the route from my
current location to e-mode location.



> On Fri, 8 Jun 2012, Ari Moisio wrote:
>
>> Hi
>>
>> I got again lost because of the accidental exploration mode. Would it be
>> possible to have entereint that mode a bit harder. I cannto even think
>> about sitiuation when a newbie  gets totally lost with taht mode: for
>> example pressingt  any of the cursor keys just repeats last announce in 
>> the
>> screen. Even it would help if the arrow keys would exit from exploration
>> mode or  as a bare minimum operate same way as in navigation mode.
>>
>>
>>
>>
>> -- 
>> mr. M01510 & guide Loadstone-GPS
>> Lat: 62.38718, lon: 25.64672
>> hkp://wwwkeys.pgp.net B784D020
>> 0C1F 6A76 DC9D DD58 3383 8B5D 0E76 9600  B784 D02
>> _______________________________________________
>> Loadstone mailing list
>> Loadstone at loadstone-gps.com
>> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>>
> _______________________________________________
> Loadstone mailing list
> Loadstone at loadstone-gps.com
> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>
-- 
mr. M01510 & guide Loadstone-GPS
Lat: 62.38718, lon: 25.64672
hkp://wwwkeys.pgp.net B784D020
0C1F 6A76 DC9D DD58 3383 8B5D 0E76 9600  B784 D02



_______________________________________________
Loadstone mailing list
Loadstone at loadstone-gps.com
http://www.loadstone-gps.com/mailman/listinfo/loadstone 



More information about the Loadstone mailing list