[Loadstone] gps reciever

Stephen Giggar sgiggar at sbcglobal.net
Sun Apr 11 22:26:16 BST 2010


You will also need to have the Network base enabled along withg the Assisted 
GPS options in the Positioning settings of the phone.

Signed: Stephen Giggar
Skype: dr-phone.

Hardware eventually fails, software eventually works.
No amount of bandwidth can fix poor design.

----- Original Message ----- 
From: "Kit" <goldeneagle74 at gmail.com>
To: <loadstone at loadstone-gps.com>
Sent: Sunday, April 11, 2010 3:37 PM
Subject: Re: [Loadstone] gps reciever


Hi,

Pls note that when Assisted GPS is used, you will be charged if you don't 
have  unlimited data access package on your phone line.

If you are not using any other  GPS applications, then use the Assisted GPS 
through LoadStone.

1.  If it says no signal, go to options, then GPS and select Disconnect GPS.

2.  Then Press option  and under the GPS menu select Find GPS.  Under Find 
GPS, select Assisted GPS. If you have no unlimited package access, you will 
be charge data transfer of about 7k to 10k.  So check out through the data 
transfer packet data log portion in the phone Tools to know for sure.

  3.  If you are using unlimited access, then continue using LoadStone with 
Assisted GPS. However, if not, change it to integrated GPS.

  4.  Go to GPS menu, select disconnect GPS.  Then select GPS menu again and 
under Find GPS, select Integrated GPS.  Since you have managed to get it 
connected earlier using A. GPS, now your Integrated GPS should get connected 
with no problem.

  Happy trying.
  KITT



  ----- Original Message ----- 
  From: Dave Carlson
  To: loadstone at loadstone-gps.com
  Sent: Sunday, April 11, 2010 10:06 PM
  Subject: Re: [Loadstone] gps reciever


  Try "assisted GPS" in the GPS menu. It should then use the cellular 
network
  to help in fixing your location and get a quicker initial lock to the
  constellation.

  Dave

  ----- Original Message ----- 
  From: <tempjayren at gmail.com>
  To: <loadstone at loadstone-gps.com>
  Sent: Sunday, April 11, 2010 06:12
  Subject: [Loadstone] gps reciever


  is there something i need to do outside of loadstone to turn on the
  integrated gps so loadstone can have fun with it?
  i managed to figure out how to tell loadstone what gps i wanted, that
  was good. though now it is saying no signal for, then it says a time,
  seconds or minutes depending on how long i leave it running.

  _______________________________________________
  Loadstone mailing list
  Loadstone at loadstone-gps.com
  http://www.loadstone-gps.com/mailman/listinfo/loadstone

  _______________________________________________
  Loadstone mailing list
  Loadstone at loadstone-gps.com
  http://www.loadstone-gps.com/mailman/listinfo/loadstone


--------------------------------------------------------------------------------


> _______________________________________________
> Loadstone mailing list
> Loadstone at loadstone-gps.com
> http://www.loadstone-gps.com/mailman/listinfo/loadstone
> 



More information about the Loadstone mailing list