[Loadstone] No 'talking map'.
steve at crustysocks.com
Tue Sep 22 12:46:40 BST 2009
Thanks Rob, that sounds spot on, cheers Steve.
----- Original Message -----
From: "Rob Melchers" <rob at loadstone-gps.com>
To: <loadstone at loadstone-gps.com>
Sent: Tuesday, September 22, 2009 5:18 AM
Subject: Re: [Loadstone] No 'talking map'.
> In the database explorer enter the desired centerpoint and select an area
> of 5.5 KM. This usually results in a list of points under 1000. Select
> 'select all' in step 2 and all you have to do is go to the download page
> and collect the checklist. You can experiment with the area size to see if
> a larger area still fits in the below 1000 scheme.
> At 9/21/2009, you wrote:
>>Thanks for that Rob. The last question from me on this subject is, if
>>that's the case, is it possible to create smaller databases and check them
>>if they only have a few hundred points? or is this something that
>>Loadstone just doesn't do? cheers Steve.
>>----- Original Message ----- From: "Rob Melchers" <rob at loadstone-gps.com>
>>To: <loadstone at loadstone-gps.com>
>>Sent: Monday, September 21, 2009 1:50 PM
>>Subject: [Loadstone] No 'talking map'.
>>>Since the question about a talking map (check all points in database) has
>>>been asked several times on this list the following paragraph has been
>>>added to chapter 2 of the Getting Started Manual:
>>>No 'talking map"
>>>The database technology currently used in the Loadstone-GPS program does
>>>not allow an unlimited number of points to be checked (marked as a
>>>It is therefore not possible to use this program as a so called 'talking
>>>map'. Experience has learned that the maximum number of checkpoints that
>>>will not 'freeze' the program is around 1000.
>>>Loadstone mailing list
>>>Loadstone at loadstone-gps.com
>>Loadstone mailing list
>>Loadstone at loadstone-gps.com
> Loadstone mailing list
> Loadstone at loadstone-gps.com
More information about the Loadstone