[Loadstone] Comparing cold/warm/hot start

Jacob Kruger jacobk at iburst.co.za
Fri Jan 9 15:51:17 GMT 2009


FAIK, cold start is better if you're not in a hurry, since it's the best, 
complete restart.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
'...Fate had broken his body, but not his spirit...'

----- Original Message ----- 
From: "Adhimoolam Vetrivel Murugan" <vadhimoolam at gmail.com>
To: <loadstone at loadstone-gps.com>
Sent: 07 January, 2009 11:59 PM
Subject: Re: [Loadstone] Comparing cold/warm/hot start


> Thanks for the clarification Jacob. But does the warm/hot restart
> affect the performence in anyway than the cold restart? If not, then
> why is the cold start prefered over others? Could it be that it would
> refresh the memory or something?
>
> Vetri.
>
> On 07/01/2009, Dave Carlson <dgcarlson at sbcglobal.net> wrote:
>> Yep. Nothing to do with outside temperature, at all.
>> ----- Original Message -----
>> From: "Jacob Kruger" <jacobk at iburst.co.za>
>> To: <loadstone at loadstone-gps.com>
>> Sent: January 07, 2009 1:04 PM
>> Subject: Re: [Loadstone] Comparing cold/warm/hot start
>>
>>
>> As far as I know, hot start is just the quickest restart, warm is 
>> halfway,
>> and cold restart is a complete restart/reset of the unit.
>>
>> They all have their better reasons/situations to apply them, but I'd
>> generally rather go for the complete, cold start if it suits the 
>> situation
>> since it's more _reliable_.
>>
>> Stay well
>>
>> Jacob Kruger
>> Blind Biker
>> Skype: BlindZA
>> '...Fate had broken his body, but not his spirit...'
>>
>> ----- Original Message -----
>> From: "Adhimoolam Vetrivel Murugan" <vadhimoolam at gmail.com>
>> To: <loadstone at loadstone-gps.com>
>> Sent: 07 January, 2009 10:36 PM
>> Subject: [Loadstone] Comparing cold/warm/hot start
>>
>>
>>> Hi all,
>>>
>>> In my experience, hot start seems to be far quicker than cold or warm
>>> start. Until now I was under the assumption that these are linked with
>>> the actual outside weather condition, but it does not look like. For
>>> example, when I initiate a warm/cold start, I do not receive signal
>>> even after crossing two blocks. However when I tried hot start even
>>> under the cold/rainy condition, I receive signal within a few seconds.
>>> So my question is: Is it just a co-incident or do they really make a
>>> different? Second, when we initiate these commands in our phone, do
>>> they actually change the GPS receiver to different modes remotely? Or
>>> are these just changes that we make within LS to receive signals
>>> quickly? I know that there are lots of questions, but I am really
>>> curious.
>>>
>>> Vetri.
>>> _______________________________________________
>>> Loadstone mailing list
>>> Loadstone at loadstone-gps.com
>>> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>>>
>>
>> _______________________________________________
>> Loadstone mailing list
>> Loadstone at loadstone-gps.com
>> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>> _______________________________________________
>> Loadstone mailing list
>> Loadstone at loadstone-gps.com
>> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>>
> _______________________________________________
> Loadstone mailing list
> Loadstone at loadstone-gps.com
> http://www.loadstone-gps.com/mailman/listinfo/loadstone
> 



More information about the Loadstone mailing list