[Loadstone] a WASS question
Corange at PSC.STATE.FL.US
Wed Aug 26 16:36:07 BST 2009
I am curious about this response.
I've only had experience with a few models of GPS receivers, but they
*all* had WAAS enabled by default (why wouldn't they?).
Florida Public Service Commission
Chip.Orange at psc.state.fl.us
(Any opinions expressed are solely those of the author and do not
necessarily reflect those of the Florida Public Service Commission.)
> -----Original Message-----
> From: loadstone-bounces at loadstone-gps.com
> [mailto:loadstone-bounces at loadstone-gps.com] On Behalf Of
> Shawn Kirkpatrick
> Sent: Tuesday, July 28, 2009 6:50 PM
> To: loadstone at loadstone-gps.com
> Subject: Re: [Loadstone] a WASS question
> The receiver is probably using a command set we don't know.
> In that case
> loadstone can't send the propper command to activate waas.
> manufacturers don't always document the commands they use.
> On Tue, 28 Jul 2009, Jim Noseworthy wrote:
> > Hi Folks:
> > I am using an E71 with Loadstone and a BT A Plus GPS receiver.
> > Using the Braillenote GPS, I am able to acquire a GPS
> reading of waas, three metres, 9 satellites.
> > Leaving the GPS receiver in the same position, while using
> Loadstone, I receive an accuracy of 7.6 metres and a three
> dementional differential GPS fix.
> > I am not able to acquire waas. Waas is turned on.
> However, even if I turn it off, my readings are exactly the same.
> > Any help would be appreciated all over the place.
> > " He is no fool who gives what he cannot keep, to gain what
> he cannot lose. "
> > Jim Elliot,
> Loadstone mailing list
> Loadstone at loadstone-gps.com
More information about the Loadstone