[Loadstone] Anoying Problem with Loadstone and Talks

Shawn Kirkpatrick shawn at loadstone-gps.com
Tue May 13 02:28:53 BST 2008


That information is helpful. It would seem that the screen isn't getting 
cleared completely for some reason. I'm not sure why that would be thoe, 
loadstone does a screen clear before doing any output. There must be some 
difference in the opperating system on these phones.

On Mon, 12 May 2008, Stephen Giggar wrote:

>
> Shawn
>
> Hear is some information I hope help you with the N82 issue as far as it speaking the last part of a
> submenu information.
>
> The information is still on the screen of the N82 and that is why both screen readers are reading
> the information. I went into the Object viewer with Talks and it allows you to see what is on the
> screen. The information shows up on the lines above the Options and Exit lines near the bottom of
> the screen. The way you get into the Object viewer of Talks is by doing a Talks followed by a long
> Select.
>
> Signed: Stephen Giggar
> Skype: dr-phone.
>
> ----- Original Message -----
> From: "Shawn Kirkpatrick" <shawn at loadstone-gps.com>
> To: <loadstone at loadstone-gps.com>
> Sent: Monday, May 12, 2008 7:01 PM
> Subject: Re: [Loadstone] Anoying Problem with Loadstone and Talks
>
>
>> If you've been reading the list then you know that this is a known problem
>> with the n82. If anyone figures out a work around I'd like to know,
>> especially from a programming point of view. There's just no reason this
>> should be happening. I'd also be interested to know what's happening
>> visually on the phone. Is the unwanted data actually on the screen or just
>> in talk's memory? We're working on getting an n82 for testing but until that
>> happens we need feedback from users to try and figure out what's going on.
>>
>> On Mon, 12 May 2008, Michael O. Hanson wrote:
>>
>>> I got Loadstone to work on a Nokia N82 with Talks.  It generally works as well as on my 6680.
>>>
>>> Having said that, there is one particularly annoying feature.  When I load a list of checkpoints,
>>> whatever key I press after that will do what it is supposed to and then say "load checkpoints,
>>> one of two."  What do I need to do to prevent or stop Talks from repeating "load checkpoints?"
>>>
>>> Thanks,
>>>
>>>
>>> Mike Hanson
>>>
>> _______________________________________________
>> Loadstone mailing list
>> Loadstone at loadstone-gps.com
>> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>
> _______________________________________________
> Loadstone mailing list
> Loadstone at loadstone-gps.com
> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>


More information about the Loadstone mailing list