[Loadstone] Arrival radius

Shawn Kirkpatrick shawn at loadstone-gps.com
Mon May 12 09:36:59 BST 2008


The approach time setting will have no effect on the arrival radius. 
Arriving will only be announced when you're within the radius set by arrival 
radius.

On Mon, 12 May 2008, Ari Moisio wrote:

> Hi
>
> Look for approach time setting, it will adapt automatically with your 
> current speed.
>
> btw: i use locked point for this type of searches. Of course it requires a 
> bit more effort to monitor the destination point periodically but i 'look 
> around' anyway during the trips so this is not an issue for me.
>
>
> You can still escape from the Gates of hell: Use Linux!
> -- 
> mr. M01510
>
>
> On Sun, 11 May 2008, Cathomas Jürg wrote:
>
>> Arrival radius setting is a fine thing in a bus or train.
>> But there, the value should be bigger than 16 which seems to be the best 
>> setting for walking.
>> It would be nice to have the possibility to increase/decrease  the value 
>> temporarily as is the case with other settings, e.g. by a value of 10.
>> 
>> _______________________________________________
>> Loadstone mailing list
>> Loadstone at loadstone-gps.com
>> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>> 
>


More information about the Loadstone mailing list