[Loadstone] Unable to import a POI collection

Cearbhall O Meadhra cearbhall.omeadhra at idd.ie
Mon Feb 25 07:35:16 GMT 2008


Thanks Sean!

It is 7.30 am here and I see that some very useful discussion took place
during the night! Thanks to Jim and Monty for those clarifications.

Now I see why you suggested increasing the range. I assume I will find that
in the settings somewhere?
 
All the best,
 
 
Cearbhall 
 
"Good design enables - Bad design disables"
 
Tel: 01-2864623 Mob: 087 9922227 Em: cearbhall.omeadhra at colibri.ie
 

-----Original Message-----
From: loadstone-bounces at loadstone-gps.com
[mailto:loadstone-bounces at loadstone-gps.com] On Behalf Of Shawn Kirkpatrick
Sent: 25 February 2008 01:44
To: loadstone at loadstone-gps.com
Subject: Re: [Loadstone] Unable to import a POI collection

You can look at anything you want in exploration mode if your search radius
is wide enough. Without the gps receiver connected exploration mode starts
at the last known position. If there's no known last position then it starts
at the first entry in the database.

On Sun, 24 Feb 2008, Cearbhall O Meadhra wrote:

> I see what you mean, Sean, I imagine the location is some thousands of 
> miles to the East of me. The problem with that suggestion is that I 
> was not connected to any specific location since the GPS receiver was 
> not turned on or connected to the phone!
>
> Does that mean that I, located in Ireland,  cannot look at a set of 
> points in the US or Canada? while in exploration mode with the GPS
disconnected?
>
>
> All the best,
>
>
> Cearbhall
>
> "Good design enables - Bad design disables"
>
> Tel: 01-2864623 Mob: 087 9922227 Em: cearbhall.omeadhra at colibri.ie
>
>
> -----Original Message-----
> From: loadstone-bounces at loadstone-gps.com
> [mailto:loadstone-bounces at loadstone-gps.com] On Behalf Of Shawn 
> Kirkpatrick
> Sent: 24 February 2008 00:07
> To: loadstone at loadstone-gps.com
> Subject: Re: [Loadstone] Unable to import a POI collection
>
> I'm guessing the imported points were well outside your defined search 
> radius. I think those points were check and you're in ireland? I 
> assume you have a search radius defined that makes sence for your 
> needs. If you expanded it to cover the distance then things would work 
> but might take a while. I have no idea how far away those points might be.
>
> On Sat, 23 Feb 2008, Cearbhall O Meadhra wrote:
>
>> Sean,
>>
>> I uploaded the sample two lines that Petr sent in his initial query 
>> into a .CSV file. I imported it into loadstone and it compiled 
>> normally giving the usual messages of the successful import as "2 
>> entries added, 0 duplicates ignored, etc.
>> I was surprised to find that the orientation keys reported "no points
> found"
>> in exploration mode.
>>
>> I tried varying the size of the ID field, removing unprintable 
>> characters from the quoted name string, changing the priority and 
>> accuracy values and, finally, changing the user id from Petr's to my 
>> own. None of these changes made any difference, even though the 
>> import process reported a successful creation of the compacted 
>> database each
> time.
>>
>> Have you any ideas to explain what might be happening?
>>
>> As a test of my system I successfully imported my own database files 
>> and was able to locate points found there. This reassured me that the 
>> loadstone program is functioning correctly.
>>
>>
>>
>> All the best,
>>
>>
>> Cearbhall
>>
>> "Good design enables - Bad design disables"
>>
>> Tel: 01-2864623 Mob: 087 9922227 Em: cearbhall.omeadhra at colibri.ie
>>
>>
>>
>>
>>
>>  _____
>>
>> From: loadstone-bounces at loadstone-gps.com
>> [mailto:loadstone-bounces at loadstone-gps.com] On Behalf Of Petr Rehak
>> Sent: 21 February 2008 13:27
>> To: loadstone at loadstone-gps.com
>> Subject: Re: [Loadstone] Unable to import a POI collection
>>
>>
>>
>> Hi,
>>
>>
>>
>> i suppose this is not the case. Below is a small excerpt from my CSV
file:
>>
>> table,point
>>
>> name,latitude,longitude,accuracy,satellites,priority,userid,id
>>
>> "CZ-Ambasada -
>> Afghanistan420233544228",501165700,144233300,2,4,2,62015,888256260
>>
>> "CZ-Ambasada -
>> Albanie420233370594",501019800,144112300,2,4,2,62015,888256261
>>
>> Just a note to the quoted text: originally there was a greater-than 
>> sign before the number (e.g. >420233544228, but POI Converter removed
it.
> Why?
>> What other characters are being removed and how to prevent their removal?
>>
>> Note to the Database Reprocessor tool: well, I can use it, but what 
>> it could do to make my file more valid? Moreover, if there was an 
>> error in the file, it should have aborted always at the same line 
>> number, but why does it abort at random lines (first 884, second 843, 
>> third 2592
> etc.)?
>>
>> If nothing helped, can I convert the CSV data straight into the 
>> binary format on my PC? There were (and still are) similar problems 
>> with converting CSV files to binary databases in the CellTrack 
>> application, but fortunately, CellTrack can make use of various 
>> internal database
> formats.
>>
>> Thanks.
>>
>>
>>
>> Regards,
>>
>> Petr Rehak
>>
>>
>>
>> From: loadstone-bounces at loadstone-gps.com
>> [mailto:loadstone-bounces at loadstone-gps.com] On Behalf Of Cearbhall O 
>> Meadhra
>> Sent: Thursday, February 21, 2008 1:25 PM
>> To: loadstone at loadstone-gps.com
>> Subject: Re: [Loadstone] Unable to import a POI collection
>>
>>
>>
>> Hello, Petr ,
>>
>>
>>
>> Have you checked to see if your CSV file has commas after the two 
>> words "table,point"?
>>
>>
>>
>> I was caught out with this myself for ages until I realised that the 
>> conversion of a file from text to CSV keeps the column position and 
>> marks column boundaries with a comma (",").
>>
>>
>>
>> the common result is:
>>
>> "Table,Point,,,,,,,,"
>>
>>
>>
>> If this is the case, you will need to edit the actual .CSV version of 
>> the file to remove the trailing commas on the first line.
>>
>>
>>
>> All the best,
>>
>>
>> Cearbhall
>>
>> "Good design enables - Bad design disables"
>>
>> Tel: 01-2864623 Mob: 087 9922227 Em: cearbhall.omeadhra at colibri.ie
>>
>>
>>
>>
>>
>>  _____
>>
>> From: loadstone-bounces at loadstone-gps.com
>> [mailto:loadstone-bounces at loadstone-gps.com] On Behalf Of Rob 
>> Melchers
>> Sent: 21 February 2008 07:31
>> To: loadstone at loadstone-gps.com
>> Subject: Re: [Loadstone] Unable to import a POI collection
>>
>> Hi,
>>
>> Try running the files through the Database reprocessor before sending 
>> them to the phone. Make sure that each file starts with the two 
>> header lines (table, point, etc.)
>>
>> Rob
>>
>> At 2/21/2008, you wrote:
>>
>>
>>
>> Hello,
>>
>> sorry for a high frequency of my messages, still saying "unable 
>> to...", but I am still a newbie to LoadStone GPS and haven't come 
>> across any written comments on my issues yet. So what next?
>> I tried to generate a database import file via the POI Converter on 
>> the LoadStone GPS website and all went OK. First, I prepared a CSV 
>> file, split into multiple parts as I do have a 30000 POIs database 
>> from the Czech Republic and would like to use it. As descriptions 
>> contain non-english characters, I converted the CSV file to UTF-8 
>> prior to converting. Then I ran the POI Converter and downloaded a 
>> TXT file. Then I placed it into the ImportExport folder and tried to 
>> import it into the default and my own database, no luck either. It 
>> randomly throws an error message saying something like "abort 
>> importing on line xxxx, possibly corrupted file". The line number is 
>> quite random, sometimes it is able to complete only 5%, sometimes 
>> 20%, but I have never managed to end up with a complete database yet. 
>> What might be the problem? I even tried to mute MobileSpeak or set a
> screensaver delay to 30 minutes, should it cause a problem. Any ideas?
>> Using LoadStone GPS 0.69 with Nokia 6681 and MobileSpeak 2.03.
>> Thanks.
>>
>> Regards,
>> Petr Rehak
>>
>>
>> _______________________________________________
>> Loadstone mailing list
>> Loadstone at loadstone-gps.com
>> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>>
>>
>
>
> _______________________________________________
> Loadstone mailing list
> Loadstone at loadstone-gps.com
> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>
_______________________________________________
Loadstone mailing list
Loadstone at loadstone-gps.com
http://www.loadstone-gps.com/mailman/listinfo/loadstone




More information about the Loadstone mailing list