[Loadstone] FW: Exported data

Ari Moisio arimo at iki.fi
Mon Apr 28 06:37:23 BST 2008


Hi Cearbhall

  try to add a  decimal point between integer and fractional part of lat 
and  lon coordinates. Latitude has a maximum value of 90 degrees and 
longitude has range of -180 to 180 degrees.

  Integer formats without decimal points are for LS internal usage.

You can still escape from the Gates of hell: Use Linux!
-- 
mr. M01510


On Sun, 27 Apr 2008, Cearbhall O Meadhra wrote:

> Dear All,
>
> Further to my report about the manual input. Today I tried to enter a test
> line of somewhere with a latitude of 539966743 and -69175432 degrees West
> followed by a Longitude of my own house on "Meath Road" which is at latitude
> 53.667792 degrees North and the result is shown below.
>
> In the case of Meat Road, I did not try to input the Longitude once I found
> the Latitude being substituted by "90". As you can see, the Latitude is
> shown as 900000000 in both cases and the Longitude  for the "Test" entry is
> shown as 180 followed by zeroes where I input -69175432 and is shown as a
> simple zero in the Meath Road example where I did not try to input any
> value.
>
> Can anyone help with this?
>
> Here is the result:
>
> table,point
> name,latitude,longitude,accuracy,satellites,priority,userid,id
> "test",900000000,-1800000000,0,0,0,39208,1209302559
> "meath road",900000000,0,0,0,0,39208,1209337736
>
>
>
> All the best,
>
>
> Cearbhall
>
> "Good design enables - Bad design disables"
>
> Tel: 01-2864623 Mob: 087 9922227 Em: cearbhall.omeadhra at colibri.ie
>
>
> -----Original Message-----
> From: loadstone-bounces at loadstone-gps.com
> [mailto:loadstone-bounces at loadstone-gps.com] On Behalf Of Jacob Kruger
> Sent: 27 April 2008 22:49
> To: loadstone at loadstone-gps.com
> Subject: Re: [Loadstone] FW: Exported data
>
> Am pretty sure that mine doesn't immediately corrupt the input data as such,
> but will try double-check with both versions and let you know.
>
> Stay well
>
> Jacob Kruger
> Blind Biker
> Skype: BlindZA
> '...Fate had broken his body, but not his spirit...'
>
> ----- Original Message -----
> From: "Cearbhall O'Meadhra" <president at idd.ie>
> To: <loadstone at loadstone-gps.com>
> Sent: Sunday, April 27, 2008 8:03 PM
> Subject: [Loadstone] FW: Exported data
>
>
>> Dear Jacob,
>>
>> I thought I would reply to this in the open discussion list to see if
>> anyone
>> else is having the same problem.
>>
>> I have tried to enter a point using the option "enter point" as you
>> describe
>> below and I have a problem with it. I can enter the name, but when I enter
>> the Latitude the field reverts to "0" as soon as I arrow to the next
>> field.
>> Then when I enter the longitude, again, as soon as I arrow away from the
>> Longitude field it reverts to "-18)" no matter what values I type in. I
>> have
>> not seen this reported as a problem before, so I wonder if anyone can tell
>> me what I am doing wrong?
>>
>> I am using Loadstone v. 6.9os60_282007
>>
>> All the best,
>>
>>
>> Cearbhall
>>
>> "Good design enables - Bad design disables"
>>
>> Tel: 01-2864623 Mob: 087 9922227 Em: cearbhall.omeadhra at colibri.ie
>>
>>
>> -----Original Message-----
>> From: Jacob Kruger [mailto:jacobk at cknet.co.za]
>> Sent: 26 April 2008 08:12
>> To: Cearbhall O'Meadhra
>> Subject: Re: Exported data
>>
>> I did exactly the same thing as with those two points:
>> Options|Functions|Enter point...
>>
>> Like I said in some previous mails, it's almost like there's a limit on
>> the
>> number of 'activities' I can carry out or something - who knows...
>>
>> Stay well
>>
>> Jacob Kruger
>> Blind Biker
>> Skype: BlindZA
>> '...Fate had broken his body, but not his spirit...'
>>
>> ----- Original Message -----
>> From: "Cearbhall O'Meadhra" <president at idd.ie>
>> To: "'Jacob Kruger'" <jacobk at cknet.co.za>
>> Sent: Friday, April 25, 2008 4:01 PM
>> Subject: RE: Exported data
>>
>>
>>> Dear Jacob,
>>>
>>> These two points are perfect as far as I can see. I think you confirmed
>>> that
>>> Loadstone is letting you see these two points.
>>>
>>> In your message this morning, you said:
>>> "Tried out specifically doing a clean install of 0.68 this morning, and,
>>> again, it lets me add two entries, but then the third one is just
>>> 'ignored'."
>>>
>>> Clearly you were not able to add another point. Could you tell me what
>>> you
>>> did to enter the third point?
>>>
>>> by the way, if you would like to talk this through, I would welcome a
>>> call
>>> on Skype. My user is comph1.
>>> All the best,
>>>
>>>
>>> Cearbhall
>>>
>>> "Good design enables - Bad design disables"
>>>
>>> Tel: 01-2864623 Mob: 087 9922227 Em: cearbhall.omeadhra at colibri.ie
>>>
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: Jacob Kruger [mailto:jacobk at cknet.co.za]
>>> Sent: 25 April 2008 13:20
>>> To: president at idd.ie
>>> Subject: Exported data
>>>
>>> Here you go...
>>>
>>> Simply did an export and then sent it originally from phone using email.
>>>
>>> Stay well
>>>
>>> Jacob Kruger
>>> Blind Biker
>>> Skype: BlindZA
>>> '...Fate had broken his body, but not his spirit...'
>>>
>>>
>>
>> _______________________________________________
>> Loadstone mailing list
>> Loadstone at loadstone-gps.com
>> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>
> _______________________________________________
> Loadstone mailing list
> Loadstone at loadstone-gps.com
> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>
> _______________________________________________
> Loadstone mailing list
> Loadstone at loadstone-gps.com
> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>
>


More information about the Loadstone mailing list