[Loadstone] Exported data

Shawn Kirkpatrick shawn at loadstone-gps.com
Mon Apr 28 01:12:56 BST 2008


If there wasn't enough disk space to write the file you'd probably get some 
kind of error report or most likely a crash.

On Mon, 28 Apr 2008, Cearbhall O Meadhra wrote:

> Jacob,
>
> No, I see that the cell data is only generated when you save a point on the
> hoof - i.e. when the GPS system is sending the data into Loadstone.
>
> As I have managed to generate a third entry, the problem you are having is
> not likely to be Loadstone
> itself.
>
> The next thing that comes to my mind is whether Loadstone has enough memory.
> Have you checked the available virtual memory already? The stored memory is
> More likely to be the problem than the virtual memory. What available memory
> have you on either the hard drive or memory card? Again, if either was
> corrupted, you might not have enough space to write the file to either the
> hard drive or the memory card.  Could it be that the dataset cannot be added
> to? Would Loadstone report an error if the memory storage was too full to
> take another entry?
>
> All the best,
>
>
> Cearbhall
>
> "Good design enables - Bad design disables"
>
> Tel: 01-2864623 Mob: 087 9922227 Em: cearbhall.omeadhra at colibri.ie
>
>
> -----Original Message-----
> From: loadstone-bounces at loadstone-gps.com
> [mailto:loadstone-bounces at loadstone-gps.com] On Behalf Of Jacob Kruger
> Sent: 27 April 2008 21:12
> To: Cearbhall O'Meadhra
> Cc: Loadstone mailing list
> Subject: Re: [Loadstone] Exported data
>
> Nope.
>
> Just went into the options menu, file, export, export all data and it went
> from there.
>
> Maybe this is actually a hint relating to what's causing the problem?
>
> Stay well
>
> Jacob Kruger
> Blind Biker
> Skype: BlindZA
> '...Fate had broken his body, but not his spirit...'
>
> ----- Original Message -----
> From: "Cearbhall O'Meadhra" <president at idd.ie>
> To: "'Jacob Kruger'" <jacobk at cknet.co.za>
> Sent: Friday, April 25, 2008 4:15 PM
> Subject: RE: Exported data
>
>
>> Jacob,
>>
>> I have just realised, your dataset does not show any cell data. There
>> should
>> be a second table like this:
>>
>> table cell
>> id mcc mnc locationareacode cellid userid name
>> 1160083245 272 5 1100 196673864 39208 "home"
>> 1160086322 272 5 1100 196673863 39208 ""
>> 1160151974 272 5 1100 196673866 39208 ""
>> 1160152461 272 5 1100 196673867 39208 ""
>>
>> What procedure did you follow for exporting the default dataset? Could you
>> have chosen an option that isolated the satellite table from the rest of
>> the
>> sheet?
>> only?
>> All the best,
>>
>>
>> Cearbhall
>>
>> "Good design enables - Bad design disables"
>>
>> Tel: 01-2864623 Mob: 087 9922227 Em: cearbhall.omeadhra at colibri.ie
>>
>>
>>
>> -----Original Message-----
>> From: Jacob Kruger [mailto:jacobk at cknet.co.za]
>> Sent: 25 April 2008 13:20
>> To: president at idd.ie
>> Subject: Exported data
>>
>> Here you go...
>>
>> Simply did an export and then sent it originally from phone using email.
>>
>> Stay well
>>
>> Jacob Kruger
>> Blind Biker
>> Skype: BlindZA
>> '...Fate had broken his body, but not his spirit...'
>>
>>
>
> _______________________________________________
> Loadstone mailing list
> Loadstone at loadstone-gps.com
> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>
> _______________________________________________
> Loadstone mailing list
> Loadstone at loadstone-gps.com
> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>


More information about the Loadstone mailing list