[Loadstone] Help me please!! A problem with Loadstone

Przemysław Rogalski Rogalski at o2.pl
Wed Sep 20 14:58:57 BST 2006


Great:)
I would like to make Polish translation for Loadstone interface
(even if it was without Polish characters at first).
How shall I do do it under Windows?
----- Wiadomość oryginalna ----- 
Od: "Shawn Kirkpatrick" <shawn at odyssey.cm.nu>
Do: "General discussion pertaining to the Loadstone GPS program" <loadstone at loadstone-gps.com>
Wysłano: 20 września 2006 14:39
Temat: Re: [Loadstone] Help me please!! A problem with Loadstone


> I'm glad that fix worked. In the next release there should be even more 
> things you can test, I've started adding international character support for 
> the importer and exporter.
> 
> On Wed, 20 Sep 2006, Przemysław Rogalski wrote:
> 
>> I'm not sure if you received my reply (from progalski at plusnet.pl, mobile phone), but if not, I would like to write, that you have solved my problem:) Thank so much for help and congratulations for success:)
>> Now I can load checkpoints, I can check my points regardless of the status of the GPS receiver, I can take full advantage from "Use Checkpoints only" and "Isolate Checkpoints" modes; additionally, I really like the announcements that these modes are checked/unchecked and enabled/disabled; I also noticed that folder name Pointlists has been changed into "Checkpoints" which is logical.
>> To sum up, I am really impressed and thankful for so many improvements made in only four days:)
>> Regards!
>> Przemyslaw
>> ----- Wiadomość oryginalna -----
>> Od: "Shawn Kirkpatrick" <shawn at odyssey.cm.nu>
>> Do: "Przemysław Rogalski" <Rogalski at o2.pl>
>> Wysłano: 20 września 2006 03:22
>> Temat: Re: Help me please!! A problem with Loadstone
>>
>>
>>> Attached is a test version of loadstone. This may fix the problem you're
>>> having with checkpoints. This is just a test version so the fix may or may
>>> not work and might not be complete. You seem to be the only one with this
>>> particular problem. When Monty tried your database he was able to check and
>>> uncheck points with no problems.
>>> As for the function you suggest implementing, I don't see how this would
>>> work. What would be used as the current point? the closest point like you'd
>>> get by pressing select or the closest point in the direction of trabel like
>>> you'd get by pressing up arrow? This wouldn't always give you the expected
>>> result. If you want to update the position of the point then there's a good
>>> chance that this wouldn't work since the point's position is wrong. If you
>>> know a point is wrong it's easier to find it before you get to it in
>>> exploration mode, wait until you arrive at the propper position and then do
>>> the update. But if you aren't in position even long enought to locate the
>>> point then there's a good chance your position won't be very accurate
>>> anyway.
>>>
>>> On Tue, 19 Sep 2006, Przemysław Rogalski wrote:
>>>
>>>> OK, I changed all comas into dots in all my CheckPoint files, but after loading a corrected file, "Use checkpoint" mode doesn't still appear in the menu; I also can't check/uncheck points.
>>>>
>>>> What may I try to do in order to sove this problem?
>>>>
>>>>
>>>> Finding a current POI in exploration mode in ten seconds is quite difficult for m e.
>>>> That's why I insist on introducing a function thanks to which you could quickly mark and update a current point (eg. just by going to exploration mode, pressing star and #).
>>>>
>>>>
>>>> ----- Wiadomość oryginalna -----
>>>> Od: "Shawn Kirkpatrick" <shawn at odyssey.cm.nu>
>>>> Do: "Przemysław Rogalski" <Rogalski at o2.pl>
>>>> DW: "Monty Lilburn" <monty at loadstone-gps.com>
>>>> Wysłano: 19 września 2006 01:36
>>>> Temat: Re: Help me please!! A problem with Loadstone
>>>>
>>>>
>>>>> Hello.
>>>>> I see the problem but I'm not sure how it's going to be solved. Do you use a
>>>>> different separator for decimal numbers? All your pointlist (checkpoint now)
>>>>> files are wrong, they contain the comma character where there should be a
>>>>> dot. This is probably to do with your locale settings. for you would a
>>>>> number like 1.5 be written 1 period 5 or would it be 1 comma 5? This could
>>>>> be very tricky to fix.
>>>>>
>>>>> On Mon, 18 Sep 2006, Przemysław Rogalski wrote:
>>>>>
>>>>>> Hello!
>>>>>> Could you please examine my Loadstone files and check:
>>>>>> 1. Why I can't check/uncheck points (regardles of the status of my GPS receiver)?
>>>>>> 2. Why does "Use checkpoints" mode not appear in the menu after I have loaded any of my checkpoint lists?
>>>>>> I reinstalled the application and created my default database several times, but it didn't help.
>>>>>> Help me, please...
>>>>>> Przemyslaw
>>>>>>
>>>>>
>>>>
>>>
>>
>> _______________________________________________
>> Loadstone mailing list
>> Loadstone at loadstone-gps.com
>> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>>
>


--------------------------------------------------------------------------------


> _______________________________________________
> Loadstone mailing list
> Loadstone at loadstone-gps.com
> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>



More information about the Loadstone mailing list