[Loadstone] A small suggestion

Brett brett06 at tpg.com.au
Wed Sep 20 12:17:57 BST 2006


Hi all, 

Is it possible to dig out the key codes, so that we can add to the
keymap file? I think adding the "find point" option to a key stroke
would be much quicker than going through the menus and would allow us to
more easily get our points as accurate as possible.

Cheers,
Brett.


-----Original Message-----
From: loadstone-bounces at loadstone-gps.com
[mailto:loadstone-bounces at loadstone-gps.com] On Behalf Of Monty Lilburn
Sent: Tuesday, 19 September 2006 6:34 AM
To: General discussion pertaining to the Loadstone GPS program
Subject: Re: [Loadstone] A small suggestion


Hi,

If you have several points in your database and you find virtually
moving 
to the point in question too difficult or time consuming, try the "Find 
point" function located in the Options/Functions menu while in
Exploration 
mode.

Monty



On Mon, 18 Sep 2006, [iso-8859-2] Przemys?aw Rogalski wrote:

> Thanks for your reply. I read it in the documentation, but in practice

> sometimes it's quite difficult to quickly find a current POI by keys 
> 1-9 (especially if there are many points in database nearby). If I 
> have eg. ten seconds for making change of my current POI, I will not 
> manage... OK, if I press joystick in the navigation mode and the 
> Loadstone is showing my current POI, I can press 0 to go to 
> exploration mode and then the same POI is shown, but even if I press 
> 5, I can't then mark this POI by pressing * or update by pressing #. 
> It would be nice if I could...
>
> ----- Wiadomo?? oryginalna -----
> Od: "Monty Lilburn" <monty at loadstone-gps.com>
> Do: "General discussion pertaining to the Loadstone GPS program" 
> <loadstone at loadstone-gps.com>
> Wys?ano: 18 wrze?nia 2006 20:43
> Temat: Re: [Loadstone] A small suggestion
>
>
>> Hello,
>>
>> Yes there is a way to update the position of a previously saved 
>> point.
>>
>> 1.  Activate Exploration mode by pressing the 0 key.
>>
>> 2.  Virtually move to the point you would like to update using keys 1

>> through 9.
>>
>> 3.  Once on the point you would like to update, press the NumberSign 
>> key.
>>
>> 4. *optional*:  If you wish you can update any field in the presented

>> form.  (E.G. misspelled text label, Long/Lat ETc)
>>
>> 5.  Press Softkey1 and choose: Save using current.
>>
>> 6.  Press the 0 key to once again return to Navigation mode.
>>
>>
>> Also, regarding your problem with Checking (marking) points in 
>> Exploration mode I was able to do this with success.  Are you first 
>> virtually moving to the point in question  using keys 1 through 9 
>> then pressing the Asterisk key? Best regards,
>>
>> Best regards,
>>   Monty
>>
>> On Mon, 18 Sep 2006, [iso-8859-2] Przemys?aw Rogalski wrote:
>>
>>> Hi!
>>> Is it possible to quickly (in just few seconds) update the point you

>>> are currently being shown in Navigation mode? Imagine you saved a 
>>> POI of the busstop; but few days later, going by the same bus, you 
>>> notice that precision of your POI is too low, so you want to correct

>>> it; however, the bus stops only for eg. ten seconds. You would like 
>>> to qukckly update the existing current POI , and not create a new 
>>> one. Is there a way to do it? Thank for reply! Przemyslaw
>>>
>>> _______________________________________________
>>> Loadstone mailing list
>>> Loadstone at loadstone-gps.com 
>>> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>>>
>> _______________________________________________
>> Loadstone mailing list
>> Loadstone at loadstone-gps.com 
>> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>>
>
> _______________________________________________
> Loadstone mailing list
> Loadstone at loadstone-gps.com 
> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>
_______________________________________________
Loadstone mailing list
Loadstone at loadstone-gps.com
http://www.loadstone-gps.com/mailman/listinfo/loadstone


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.12.5/451 - Release Date:
19/09/2006
 



More information about the Loadstone mailing list