[Loadstone] problems with royaltek rbt2010

Raymond Jansen r.jansen at wanadoo.nl
Wed Jul 26 18:40:52 BST 2006


Hi Sjane,

Can this Static Navigation on/off not be implemented into Loadstone, just 
like the other gps commands?

Regards,

Raymond

----- Original Message ----- 
From: "Shane" <shane at cm.nu>
To: "General discussion pertaining to the Loadstone GPS program" 
<loadstone at loadstone-gps.com>
Sent: Wednesday, July 26, 2006 7:35 PM
Subject: Re: [Loadstone] problems with royaltek rbt2010


> Yeah static navigation definitely needs to be off and
> should default to off in any recent Sirf III firmware.
> However, if you notice no movement and then big jumps (60
> metres) while moving, it's likely on and needs to be
> disabled in SirfDemo.  With the rbt units though, that's
> likely not your problem.
>
> S
>
> On Wed, Jul 26, 2006 at 09:37:25PM +1000, Brett wrote:
>> Not sure if this will help, as I don't yet have a GPS receiver, but 
>> reading
>> reviews of some, one of them did say that if using it for walking and 
>> slow
>> navigation to turn of the "static Navigation" (SN) feature as it is 
>> suppose
>> to make the positioning more accurate for slow travel, like walking.
>>
>> Cheers,
>> Brett.
>>
>>
>>
>> -----Original Message-----
>> From: loadstone-bounces at loadstone-gps.com
>> [mailto:loadstone-bounces at loadstone-gps.com]On Behalf Of Shawn
>> Kirkpatrick
>> Sent: Wednesday, 26 July 2006 7:46 PM
>> To: General discussion pertaining to the Loadstone GPS program
>> Subject: Re: [Loadstone] problems with royaltek rbt2010
>>
>>
>> Hello.
>> Having an accuracy within 8 meters isn't uncommon. Even standing still 
>> there
>> will be a bit of drift. The accuracy will also be effected by the
>> environment you happen to be in, such as tall buildings, under cover etc.
>> The route mode only becomes available after you mark one or more points 
>> in
>> the exploration mode.
>>
>> On Wed, 26 Jul 2006, Tasha Raella Chemel wrote:
>>
>> > Ok, Now I'm getting some signal, but my receiver isn't at all accurate. 
>> > I
>> > know it's suppose to be accurate to about ten meters, but when I walked
>> > about 30 meters (and even after I arrived at my destination!) it was 
>> > still
>> > saying "crossley, 8 meters to the south." also, route mode isn't 
>> > present
>> in
>> > the functions menu, just exploration and navigation modes.
>> >
>> > thanks,
>> > tasha
>> > ----- Original Message -----
>> > From: "David Tanner" <david-tanner at peoplepc.com>
>> > To: "General discussion pertaining to the Loadstone GPS program"
>> > <loadstone at loadstone-gps.com>
>> > Sent: Wednesday, July 26, 2006 12:35 AM
>> > Subject: Re: [Loadstone] problems with royaltek rbt2010
>> >
>> >
>> >> It sounds like your receiver is connected, but that you aren't finding
>> any
>> >> satelites.  I have gotten that message a couple of times, but when I 
>> >> got
>> >> outside away from the building it was picking up fine.  I have the 
>> >> same
>> >> receiver, and it works great with Loadstone.
>> >>
>> >>
>> >> ----- Original Message -----
>> >> From: "Tasha Raella Chemel" <tashiegirl at rcn.com>
>> >> To: <Loadstone at loadstone-gps.com>
>> >> Sent: Tuesday, July 25, 2006 11:53 AM
>> >> Subject: [Loadstone] problems with royaltek rbt2010
>> >>
>> >>
>> >> Hi, i'm havigng trouble connecting my rbt 2010 to my cell phone. when 
>> >> i
>> >> ask my cell phone to find my gps receiver, it says something like
>> >> "bluetooth d038" (i can't figure out how to get mobilespeak to spell 
>> >> it.
>> >> then, when I try to connect, it says "no signal" Sometimes it appears 
>> >> to
>> >> be connected, because there is a disconnect gps option in the  gps 
>> >> menu.
>> >> my phone has also been able to tell me the time according to my gps
>> >> receiver, and the number of satellites in my area, but when i ask it 
>> >> to
>> >> give me my long an lat positions, nothing happens. I can't tell 
>> >> whether
>> my
>> >> gps receiver is really connected. Also, I tried to create a waypoint 
>> >> (my
>> >> dorm at school) but after I entered the information, it was still 
>> >> saying
>> >> no waypoints found. what kind of information is required in order to
>> >> create a waypoint? any help with either of these issues would be 
>> >> greatly
>> >> apreciated.
>> >>
>> >> tasha
>> >>
>> >>
>> >> -------------------------------------------------------------------------
>> -------
>> >>
>> >>
>> >> : _______________________________________________
>> >> : Loadstone mailing list
>> >> : Loadstone at loadstone-gps.com
>> >> : http://www.loadstone-gps.com/mailman/listinfo/loadstone
>> >> :
>> >>
>> >> _______________________________________________
>> >> Loadstone mailing list
>> >> Loadstone at loadstone-gps.com
>> >> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>> >
>> > _______________________________________________
>> > Loadstone mailing list
>> > Loadstone at loadstone-gps.com
>> > http://www.loadstone-gps.com/mailman/listinfo/loadstone
>> >
>> _______________________________________________
>> Loadstone mailing list
>> Loadstone at loadstone-gps.com
>> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>>
>>
>>
>>
>> _______________________________________________
>> Loadstone mailing list
>> Loadstone at loadstone-gps.com
>> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>
> -- 
> http://www.cm.nu/~shane/
> _______________________________________________
> Loadstone mailing list
> Loadstone at loadstone-gps.com
> http://www.loadstone-gps.com/mailman/listinfo/loadstone
>
> 



More information about the Loadstone mailing list